Regulatory Information; Known Issues - HP 316095-B21 - StorageWorks Edge Switch 2/24 Release Note

Regulatory Information

Note:
blank for a few minutes during boot up. This is normal. After a few minutes the screen
displays "Welcome".
Regulatory Information
The following regulatory information was erroneously omitted from the HP
StorageWorks HA-Fabric Manager Server Installation Guide.
TELECOMMUNICATIONS NOTICE FOR JAPAN
The modem supplied with this equipment, part number MT5634ZPX-PCI, is
approved for use in Japan. The Japanese approval number is A00-1160JP.

Known Issues

This section describes the known issues related to the 1U HAFM server and the
HAFM software.
HAFM Server LCD Screen Displays Wrong IP Address
During configuration of HAFM Server networking, the following items must be
taken into consideration:
14
After you enter the IP address and the server reboots, the LCD screen remains
When setting the IP address using the Liquid Crystal Display (LCD) console
display on the server, the IP address shown in the window is for the other
network interface. (For example, if you are changing the LAN 1 address, the
LAN 2 address is shown in the display window).
Please input the full address that is desired for the chosen interface—this
operation implements the interface that you have targeted with the address in
the set window.
If the preset IP addresses are changed before the HAFM server is connected to
the Ethernet network, the address changes are not shown on the LCD console
and do not take effect until after the HAFM server is rebooted.
HA-Fabric Manager Release Notes