Zoning Limitations; Using The Same Firmware - HP 316095-B21 - StorageWorks Edge Switch 2/24 Release Note

Fw 05.01.00 and sw 07.02.00 hp storageworks ha fabric manager release notes
Hide thumbs Also See for 316095-B21 - StorageWorks Edge Switch 2/24:
Table of Contents

Advertisement

Important Information

Zoning Limitations

Firmware Version 05.01.00-24 includes the ability to configure large zone sets,
including up to 1024 zones and 1024 end ports in a single zone set.
the supported limits for the edge switches and directors.
Note:
conforming to zoning rules will be restricted to their assigned zones.
Table 2: Zoning Parameters Supported Limits
Number of end ports
Unique zone members
Members per zone
Zones
Number of zone sets
Maximum devices supported
Note:
32 characters. On all edge switches and directors except the Director 2/140, the
maximum number of zones decreases if full 64 character names are used. The
supported limits are based on two members per zone.
Zone set sizes are affected by the number of zones in the zone set, the length of
each zone name, the number of members in each zone, and the Interoperability
mode of the fabric. Please consult with HP Professional Services or your support
representative if you have questions regarding specific zone set configurations.

Using the Same Firmware

All switches and directors in the same fabric should have the same FW level
installed—whether 1 Gbps or 2 Gbps capable.
12
Hard Zoning will be enforced upon firmware initialization. Devices not
Zoning Parameter
The supported number of zones is based on a zone name with a maximum of
Maximum Value
1024
1024
1024
1024
64
1024
HA-Fabric Manager Release Notes
Table 2
shows

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks 2/24 - edge switch

Table of Contents