5- RAID-1/0 Group (Mirrored RAID-0 Group)
7- Hot Spare
3) Unbind Logical Units
4) View Maintenance Information
1- Display Unsolicited Event Log
2- Display Faulted CRUs
3- Display Verify Results
4- Display LUN Configuration Summary
5) Change Parameters
1- Change Logical Unit Parameters
1. Change Default SP Ownership of Unit
2. Change Unit Rebuild Time
3. Change Unit Auto Assign
4. Change Unit Caching Parameters
6-26
Displays dialogue for making a RAID-1/0 LUN
Displays dialogue for making a hot spare
Displays dialogue for unbinding a LUN
Displays the Unsolicited Event Logs, starting at entry number 1.
Allows selection of a filter for either error code or FRU.
Displays detailed information on the cause of CRU failures.
Displays results of LUN the verification test
Displays LUN numbers, ownership, RAID type, cache states,
and number of disks in LUN
Displays dialogue for changing SP ownership
Displays dialogue for changing rebuild time
Displays dialogue for changing auto assign
Displays dialogue for changing unit caching