2- RAID-3 Group (Parallel Access Array)
Displays dialogue for making a RAID-3 LUN
3- RAID-1 Mirrored Pair
Displays dialogue for making a RAID-1 LUN
4- RAID-0 Group (Non-redundant Individual Access Array)
Displays dialogue for making a RAID-0 LUN
5- RAID-1/0 Group (Mirrored RAID-0 Group)
Displays dialogue for making a RAID-1/0 LUN
6- Individual Disk Unit
Displays dialogue for making an independent mode disk
7- Hot Spare
Displays dialogue for making a hot spare
3) Unbind Physical Units
Displays dialogue for unbinding a LUN
4) View Unsolicited Event Log
Displays the Unsolicited Event Logs, starting at entry number 1.
Allows selection of a filter for either error code or FRU.
5) Change Parameters
1- Change Physical Unit Parameters
1. Change Default SP Ownership of Unit
Displays dialogue for changing SP ownership
2. Change Unit Rebuild Time
Displays dialogue for changing rebuild time
3. Change Unit Auto Assign
Displays dialogue for changing auto assign
4. Change Unit Caching Parameters
Displays dialogue for changing unit caching
6-21