Vlan-Enabling A Port; Removing A Port From A Vlan; Vlan-Enabling A Group; Removing A Group From A Vlan - D-Link DSN-5410-10 - xStack Storage Area Network Array Hard Drive Software Manual

7.6.1 VLAN-Enabling a Port

To VLAN-enable a port:
1. In the Network Settings View, click an Ethernet port in the Main Display.
2. Perform one of the following steps:
On the Network menu, click Replace Port with VLAN enabled Port.
–
Click Replace Port with VLAN enabled Port in the Network Actions panel.
–
Press the right mouse button and click Replace Port with VLAN enabled Port from
–
the shortcut menu.

7.6.2 Removing a Port from a VLAN

If you no longer want a port to participate in a VLAN:
1. In the Network Settings View, click a VLAN-enabled Ethernet port in the Main Display.
2. Perform one of the following steps:
On the Network menu, click Replace VLAN enabled Port with standard Port.
–
Click Replace VLAN enabled Port with standard Port in the Network Actions panel.
–
Press the right mouse button and click Replace VLAN enabled Port with standard
–
Port from the shortcut menu.

7.6.3 VLAN-Enabling a Group

There are two ways to VLAN enable a group:
When you create the group - check Create VLAN enabled Group in the Group Ports

dialog box (see section 7.5.1).
After you create a group – using the Replace Group with VLAN enabled Group option

(described below).
To VLAN-enable a group using the Replace Group with VLAN enabled Group option:
1. In the Network Settings View, click a group in the Main Display.
2. Perform one of the following steps:
On the Network menu, click Replace Group with VLAN enabled Group.
–
Click Replace Group with VLAN enabled Group in the Network Actions panel.
–
Press the right mouse button and click Replace Group with VLAN enabled Group
–
from the shortcut menu.

7.6.4 Removing a Group from a VLAN

If you no longer want a group to participate in a VLAN:
xStack Storage Management Center Software User's Guide 117