Viewing Or Changing Advanced Settings (Advanced Settings Tab) - D-Link DSN-5410-10 - xStack Storage Area Network Array Hard Drive Software Manual

4.4.4.3 Disabling CHAP Security
To disable CHAP security:
1. In the Volume View, click the volume in the Main Display whose CHAP security you want
to disable.
2. Click the Security tab.
The options in Figure 4-34 appear.
3. Uncheck Require CHAP Logon Authentication.
4. Click Apply.
5. Record your settings in Table C-1.

4.4.5 Viewing or Changing Advanced Settings (Advanced Settings Tab)

When a volume is selected in the Main Display, the Advanced Settings tab lets you view or
change advanced settings for that volume. Figure 4-35 shows the Advanced Settings tab and
Table 4-2 describes the settings that can be modified. Table 4-3 describes the values that
are fixed and cannot be modified.
To change a setting:
1. In the Volume View, click a volume in the Main Display.
2. Click the Advanced Settings tab.
The advanced settings are displayed (see Figure 4-35).
3. In the Value column, perform one of the following steps:
– If the value is selected from a drop-down list, click in the field and select the
desired value.
If the value is entered in the field, double-click in the field and enter the desired
–
value.
4. Click Apply.
xStack Storage Management Center Software User's Guide
These settings are for expert users who understand networking concepts
and terminology.
65