D-Link DSN-5410-10 - xStack Storage Area Network Array Hard Drive Software Manual page 32

6. The Data Ports page lets you specify the IP addresses, network masks, and gateway addresses
for each iSCSI data port. Specifying these addresses at this time is optional. To skip this
screen, click Skip to Email Notification. However, if you skip this screen, you will need to
specify these addresses through the xStack Storage Management Center before you can use
the data ports. If you specify these settings now, record them in Table C-9 and click Next
when finished.
After skipping or completing the fields on the Data Ports page, the Email Notification page
appears (see Figure 3-6).
22 Chapter 3 Getting Started
Figure 3-5. Data Ports Page