Connecting To The Iscsi Data Ports; Connecting To The Dsn-2100 Host Network Connection Ports; Connecting To The Management Port - D-Link DSN-2100-10 - xStack Storage Area Network Array Hard Drive Hardware Reference Manual

Iscsi san array
Hide thumbs Also See for DSN-2100-10 - xStack Storage Area Network Array Hard Drive:
Table of Contents

Advertisement

3.4

Connecting to the iSCSI Data Ports

The following sections describe how to connect the DSN-2100 data ports.
3.4.1

Connecting to the DSN-2100 Host Network Connection Ports

The DSN-2100 storage system has four RJ-45 data ports. These ports connect to your SAN
using either a straight-through or cross-over RJ-45 Ethernet cable (the DSN-2100 storage
system auto-senses the type of cable used). One cable is needed for each RJ-45 data port.
1. Attach one end of an Ethernet cable to host network connection port 0 on the DSN-2100
storage system back panel. Connect the other end of the cable to your SAN or host
system.
2. To connect additional host network connection ports to your SAN, repeat step 1 using
another Ethernet cable and the next available DSN-2100 storage system port in sequence
(port 1, then port 2, and so on). Do not skip ports when making these connections.
3.5

Connecting to the Management Port

Connecting a PC to the management port lets you configure and manage the DSN-2100
storage system. This connection is made using a PC with an installed NIC and either a cross-
over cable (if connecting directly to the management port) or a straight-through cable (if
connecting to the management port using a hub or switch).
To receive email alerts from the DSN-2100 storage system, be sure the management port can
communicate via Ethernet with your mail server.
1. Connect either end of an Ethernet cable to a NIC installed in a PC.
2. Connect the other end of the cable into the DSN-2100 storage system Mgmt 10/100 port.
This port is located to the right of the diagnostic port on the back panel (see Figure 2-3).
DSN-2100 Hardware Reference Guide
Do not connect one NIC to the management and host network connection
ports. Connect one NIC to the management port and connect another NIC in
the same PC or a different PC to the host network connection port(s).
21

Advertisement

Table of Contents
loading

Subscribe to Our Youtube Channel

This manual is also suitable for:

Dsn-2100 xstack storage

Table of Contents