D-Link DSN-5410-10 - xStack Storage Area Network Array Hard Drive Software Manual page 53

6. By default, all iSCSI initiators will have access to the volume you create. If you prefer,
you can grant access to one or more iSCSI authorized initiators listed in the screen, grant
access to an initiator not in the list, or not grant access to an initiator at this time. If
you decide to select multiple iSCSI initiators from the list, you can use the following
shortcuts:
For adjacent iSCSI initiators, click the first one, then hold down the Shift key and
–
click the last one. The first and last initiators, and all the initiators between them,
get selected.
For non-adjacent initiators, click the first one, then hold down the Ctrl key and click
–
each subsequent initiator.
To deselect an initiator, hold down the Ctrl key and click an initiator that is
–
selected.
7. Click Next.
The Ready to Create Volume screen appears (see Figure 4-11).
xStack Storage Management Center Software User's Guide
Figure 4-10. Grant Access Screen
If you decide not to grant access to an initiator now, you can do so at a later
time (see section 4.3.1).
43