Quick Reference Guide; All - Chamberlain Elite EL2000 Programming Manual

Quick Reference
Guide for Keypad Programming the Units
Programming
Page
Number
15 Entering Programming Mode
***
0 15 Exiting Programming Mode
1 56 Change or Verify the Unit's Password
2 20 Set Unit ID Number and No. in Chain
3 52 Set the Clock
4 52 Enable/Disable Daylight Savings Time
5 61 Set Visitor Talk Time
6 29 Set Directory Code Length
7 35 Set Entry Code Length
9 59 Enable/Disable Call Waiting
10 31 Enable/Disable Do Not Disturb Schedule
11 51 Enable/Disable Unlock Time Zone
12 53 Enable/Disable Anti-Passback
13 53 Set Anti-Passback Time
14 Set Maximum Number of Rings
Allowed Before Aborting Attempt
15 Set Standard Single Ring or Double
Ring Response
16 58 Number of Rings Before Unit Answers
17 55 Set "Strikes" and "Out"
18 59 Set Call Volume
Set Voice Response Volume
Set Beep Response Volume
19 59 Set Microphone Volume
20 58 Enable/Disable the Telco Mode
21 67 Enable/Disable Direct Commands
22 60 Enable/Disable Voice Mail
23 60 Enable/Disable Access Granted Beeps
24 70 Enable/Disable Real-Time Monitoring
25 61 Return to Menu Programming
26 61 Enable/Disable All Door Access Granted
Optional Steps Indicated in BOLD type, all other steps are Required
Important: The Pound Key (#) must be used as Data Field Separator and to Save Data at the end of the
sequence. Time must be entered using a 24-hour format (8AM=0800, 3PM=1500 etc.). If you make an
error during an entry, press the asterisk key (*) to begin again.
Description of Task
Page 4
Factory Programming
Setting Procedure
*** (6 Digit Password)
0 #
000000 1 # (1 to change; 2 to verify) #
(six-digit coded) #
Unit ID 1, 2 # (unit ID number, 1-7) #
Chain No. 1 (Number of Units in Chain, 1-7) #
3 # yymmdd # (day of the week)
# hhmm #
Enabled 4 # (0=disable; 1=enable) #
60 Seconds 5 # (15-250 seconds) #
3 Digits 6 # (1-4 ) #
4 Digits 7 # (3-9) #
Enabled 9 # (0=disable; 1=enable) #
Disabled 10 # (directory code) #
(0=disable; 1=enable) #
Enabled 11 # (0=disable; 1=enable) #
Disabled 12 # Enable/Disable True Anti-
Passback (0=disable; 1=enable) #
Enable/Disable Timed Anti-
Passback (0=disable; 1=enable) #
3 Minutes 13 # (1-60 minutes) #
5 Rings 14 # (1-9) #
1=Double Ring 15 # (0-1; 0=one long ring,
1=double ring) #
5 Rings 16 # (0-15) # Each unit in chain
must have same setting
3 Errors 17 # (max errors, 0-5) #
5, 2, 2 18 # (0=mute; 1-10, 1 is low and
10 is high) # (0=mute; 1=low;
2=medium; 3=high) # (0-3) #
5 19 # (0=mute, 1-10, 1 is low and
10 is high) #
Enabled 20 # (0=disable; 1=enable) #
Enabled 21 # (0=disable, 1=enable) #
Disabled 22 # (0=disable, 1=enable) #
Enabled 23 # (0=disable, 1=enable) #
Disabled 24 # (0=disable, 1=enable) #
25 #
Disabled 26 # (0=disable, 1=enable) #