Chamberlain EL2000 Quick Start Manual

®

Quick Start Guide

For Single Family Residence No Phone Line (Without Directory Codes) Installation using
This Quick Start is intended to highlight a typical single family home with one phone line. These
instructions are not intended to be comprehensive. Each application is unique, it is the
responsibility of the purchasers, designer, installer and end user to ensure that the total control
access system is safe for its intended use. Please refer to the manuals and/or qualified technician
for further information.
NOTE: The default password is "Manager."
3. Select the DEVICES Tab
1 1
Click on the
1
"Device Configuration
Wizard" button
4. Select the RELAYS Tab
Set Relay Names, Relay Types and
1
Activation Times:
Relay # Relay Name Relay Type Relay Activation Time
1 Vehicle Gate Strike 2 Seconds
2 Vehicle Light Control 30 Seconds
3 Pedestrian Gate Strike 10 Seconds
4 Video Camera CCTV 60 Seconds
Set Relay Groups:
2
Vehicle Vehicle Pedestrian
Relay Group Name Video
Gate Light Gate
Camera
Auto Sensor Group X X
Vehicle Gate Group
X X
Pedestrian Group X
1. Click the NEW UNIT ICON
EL MODEL
Enter Unit
1
Name and
Unit Type
Versa XS
Choose "None"
2
for J407
5. Click the DOORS Tab
1
2
Enter Country,
2
State/Prov. and City
Click OK
3
Choose "Wiegand Device"
3
for J400
2
3
4
Click OK
4
1 Rename "Door 1" to "Gate Operator"
1
2
Select "Vehicle Gate Group"
2
from the drop-down menu
2. Click the Unit Configuration ICON and Select the CONTROL SETTINGS Tab
Click on the
1
"Edit" button
Uncheck the
2
"Use Telephone Service"
check box
Rename "Device 1" to
5
"Pedestrian Reader"
5
3 Rename "Door 2" to "Pedestrian Gate" and
select "Pedestrian Reader" for the Device
Pedestrian Gate 3
4
5
Select "Pedestrian Group"
4
from the drop-down menu
2
1
Disabled Disabled
Click SAVE
5