Changing The Password - Chamberlain Elite EL2000 Programming Manual

Programming Single Unit Overview
Procedure Required to Program EL Models:
1. 1,2 or 3 digit Programming Number. (See "Quick Reference Guide" Tables for descriptions
and procedures)
2. One or more Data Fields.
3. Pound Key (#) as a Data Field Separator and at the end of the programming sequence to Save
the Data.
NOTES:
• All data fields must be separated with the pound key (#).
Example: (Programming Number) # (Data Field) # (Data Field) # (Data Field) #
• Steps tagged with a ( ) are optional, press the pound key (#) to skip them. NOTE: Some
steps are required and must have data entered in them to continue, tagged with ( ).
• If you make an error during an entry, press the asterisk key (*) to cancel the step.
• When you correctly enter the entire programming sequence, the unit will respond with voice
feedback (see also System Feedback/Responses(Beeps) on page 16).
Example of a Programming Sequence: "
NOTE: must be pressed first to enter programming mode
Enter
Programming
Mode
(Next page)
Programming Number:
1
changes or verifies
the password.
Programming Basics
1
Required Step Optional Step
st
1 Pound Key:
Separates the 1 st field.
Pound Key:
Separates the data field.
Data Field:
1
changes the password
(2 verifies the password)
Page 15
2 3
Required Step

Changing the Password"

1 1
Last Pound Key:
Saves the data.
Voice
feedback
Data Field:
(The new password)
4
Required Step
Exit
Programming
Mode
(Next page)