Chamberlain Elite EL2000 Programming Manual page 47

Add or Edit a Full Function Transmitter:
Add or edit a full function transmitter. When adding a Full Function transmitter, it will default
as "active". To deactivate a transmitter, or to activate or deactivate on a specific time and
date, see Activate or Deactivate Transmitter (page 48).
Factory Settings: All Doors = 1 Full Access
Press
1
Enter Transmitter Number (1-65534). Then (#)
2
Enter Facility Code (0-255). Then (#)
3
Enter Sequence Code (0-2). Then (#)
4
Enter ID Number (0-26). Then (#)
5
Enter Button Number (1-4). Then (#)
6
Add or Edit a Group of Full Function Transmitters:
Add a large number of transmitters at once to the system. The individual transmitters can be
Factory Settings: Activate or Deactivate = 1 Activate;
edited later.
All Doors = 1 Full Access
• Group transmitters must have the same Facility Code, Sequence Code, ID Number and
Active Button.
Press
1
Enter Starting Transmitter Number (1-65534).
2
Then (#)
Enter Ending Transmitter Number (1-65534).
3
Then (#)
Enter Facility Code (0-2545). Then (#)
4
Enter Sequence Code (0-2). Then (#)
5
Enter ID Number (0-26). Then (#)
6
Enter Button Number (1-4). Then (#)
7
Then
Then
Page 46
91
Schedule for Door 1 (1-4). Then (#)
7
0=Full Restrictions 1=Full Access
Schedule for Door 2 (1-4). Then (#)
8
0=Full Restrictions 1=Full Access
Schedule for Door 3 (1-4). Then (#)
9
0=Full Restrictions 1=Full Access
Schedule for Door 4 (1-4). Then (#)
10
0=Full Restrictions 1=Full Access
94
Activate (1) or Deactivate (0). Then (#)
8
Schedule for Door 1 (1-4). Then (#)
9
0=Full Restrictions 1=Full Access
Schedule for Door 2 (1-4). Then (#)
10
0=Full Restrictions 1=Full Access
Schedule for Door 3 (1-4). Then (#)
11
0=Full Restrictions 1=Full Access
Schedule for Door 4 (1-4). Then (#)
12
0=Full Restrictions 1=Full Access