Enlarging Or Reducing The Image Copied - Brother IntelliFax-2840 Advanced User's Manual

To change the default setting follow the steps
below:
a
Press Menu, 3, 3.
Copy
3.Contrast
b
Press d or c to increase or decrease the
contrast.
Press OK.
c
Press Stop/Exit.
Brightness
Adjust the copy brightness to make copies
darker or lighter.
To temporarily change the copy brightness
setting, follow the steps below:
a
Make sure you are in COPY mode
b
Load your document.
c
Use the dial pad to enter the number of
copies (up to 99).
d
Press Options.
Press a or b to choose Brightness.
Press OK.
e
Press c to make a lighter copy or press
d to make a darker copy.
Press OK.
f
Press Start.
To change the default setting follow the steps
below:
a
Press Menu, 3, 2.
Copy
2.Brightness
b
Press c to make a lighter copy or press
d to make a darker copy.
Press OK.
c
Press Stop/Exit.
Enlarging or reducing the
image copied
You can choose the enlargement or reduction
ratios.
Auto sets the machine to calculate the
reduction ratio that best fits the size of paper.
Custom(25-400%) allows you to enter a
ratio from 25% to 400%.
To enlarge or reduce the next copy follow the
instructions below:
7
a
Make sure you are in COPY mode
b
Load your document.
c
Use the dial pad to enter the number of
copies (up to 99).
.
d
Press Options.
Press a or b to choose
Enlarge/Reduce.
Press OK.
e
Do one of the following:
 Press a or b to choose the
enlargement or reduction ratio you
want.
Press OK.
 Press a or b to choose
Custom(25-400%).
Press OK.
Use the dial pad to enter an
enlargement or reduction ratio from
25% to 400%. (For example, press
5 3 to enter 53%.)
Press OK.
f
Press Start.
Note
Page Layout Options 2 in 1 (P), 2 in 1 (L),
4 in 1 (P) and 4 in 1 (L) are not available
with Enlarge/Reduce.
Making copies
7
.
7
43