Dial Prefix; Setting Up The Prefix Number; Changing The Prefix Number - Brother IntelliFax-2840 Advanced User's Manual

Dial Prefix

The Dial Prefix setting will automatically dial a
predefined number before every fax number
you dial. For example: If your telephone
system requires a 9 to dial an outside number
use this setting to automatically dial 9 for
every fax you send.

Setting up the prefix number

a
(USA) Press Menu, 0, 5.
(Canada) Press Menu, 0, 6.
b
Enter the prefix number (up to 5 digits)
on the dial pad.
Press OK.
Note
• You can use the numbers 0 to 9, #, l
and !. (Press Hook/Hold to display "!".)
You cannot use ! with any other numbers
or characters.
If your telephone system requires a timed
break recall (hookflash), press Hook/Hold
to enter the break.
• (Canada only) If the pulse dialing mode is
on, # and l are not available to use.
c
Press Stop/Exit.

Changing the prefix number

1
a
(USA) Press Menu, 0, 5.
(Canada) Press Menu, 0, 6.
b
Do one of the following:
To change the prefix number,

press 1.
To remove the prefix number, press
Clear to delete the digits. Go to step
1
c.
 To exit without making a change,
press 2. Go to step d.
c
Enter a new prefix number using the dial
pad (up to 5 digits), press OK.
d
Press Stop/Exit.
General Setup
1
1
7