Gateway; Host Name; Wins Config - Brother IntelliFax-1920CN Network User's Manual

Gateway

This field displays the current gateway or router address used by the
machine. If you are not using DHCP or BOOTP to obtain the gateway
or router address, enter the address you wish to assign. If you do not
have a gateway or router, leave this field blank. Check with your
network manager if you are unsure.
1 Menu/Set
Press
2 1
Select to change. Enter the Gateway address.
3 Menu/Set
Press
4 Stop/Exit
Press

Host Name

You can register the machine name on the Network. This name is
often referred to as a NetBIOS name; it will be the name that is
registered by the WINS server on your network. Brother
recommends the name BRN_XXXXXX (where XXXXXX is the last
six digits of the Ethernet address) (up to 15 characters).
1 Menu/Set
Press
2
Enter the Host Name.
3 Menu/Set
Press
4 Stop/Exit
Press

WINS Config

This selection controls how the machine obtains the IP address for
the WINS Server.
1 Menu/Set
Press
2
Press
3 Menu/Set
Press
4 Stop/Exit
Press
3 - 6 FRONT PANEL SETUP
5 1 4
, , , .
.
.
5 1 5
, , , .
.
.
5 1 6
, , , .
to select Auto or Static.
or
.
.