Assigning Tcp/Ip Information Automatically (Advanced); Using Dhcp To Configure The Ip Address; Using Apipa To Configure The Ip Address - Brother IntelliFax-1920CN Network User's Manual

Assigning TCP/IP Information
Automatically (Advanced)

Using DHCP to Configure the IP address

The Dynamic Host Configuration Protocol (DHCP) is one of several
automated mechanisms for IP address allocation. If you have DHCP
Server in your network (typically a Unix/Linux or Windows
network) the Print/Fax server will automatically obtains its IP address
from DHCP server and register its name with any RFC 1001 and
1002-compliant dynamic name services.
If you do not want your Print/Fax server configured via
DHCP, BOOTP or RARP, you must set the BOOT METHOD
to static so that the Print/Fax server has a static IP address.
This will prevent the Print/Fax server from trying to obtain an
IP address from any of these systems. To change the BOOT
METHOD, use the machine's control panel or by using the
BRAdmin Professional utility.

Using APIPA to Configure the IP Address

With Automatic Private IP Addressing (APIPA), DHCP clients
automatically configure an IP address and subnet mask when a
DHCP server is not available. The device chooses it's own IP
address in the range 169.254.1.0 through to 169.254.254.255. The
subnet mask is automatically set to 255.255.0.0 and the gateway
address is set to 0.0.0.0.
By default, the APIPA protocol is enabled.
2 - 4 TCP/IP CONFIGURATION
®
2000, XP