Chapter 2. Installing optional devices
This chapter provides detailed instructions for installing optional hardware devices in
the server.
Server components
The following illustration shows the major components in the server. The
illustrations in this document might differ slightly from your hardware.
3.5-inch filler panel (hot-swap)
2.5-inch hard disk drive backplane
2.5-inch hard disk drive cage
© Copyright IBM Corp. 2008
SATA backplate
SAS backplane
3.5-inch hard disk drive cage
3.5-inch SAS hard disk drive
3.5-inch simple-swap
SATA hard disk drive
3.5-inch filler panel
(simple-swap)
2.5-inch
hard disk drive
2.5-inch
filler panel
(hot-swap)
Air baffle
Microprocessor
Power
backplane
CD-RW/DVD drive
Operator information panel
Cover
Microprocessor
heat sink
Air baffle
DIMM
Mini-SAS/SATA
controller
PCI Express
riser card
Optional
ServeRAID-MR10i
SAS/SATA
controller
System board
Power supply
Power-supply filler
Fan (2)
Fans (3 - 5)
Air baffle
15