Front View - IBM x3350 - System - 4192 User Manual

Front view

The following illustration shows the 2.5-inch hard disk drive server model.
Rack release latch
The following illustration shows the hot-swap or simple-swap 3.5-inch hard disk
drive server model.
Rack release latch
Note: The locations of the controls, LEDs, and connectors vary, depending on the
v The following illustration shows the operator information panel. This panel
Video connector
2.5-inch hard disk drives
Hard disk drive
activity LED
3.5-inch hard disk drives
hardware configuration that you have.
contains controls and LEDs that indicate the status of the server.
Power-on
LED (green)
Power- Hard drive
control activity
button LED (green)
– Power-on LED: When this green LED is lit and not flashing, it indicates that
the server is turned on. When this LED is flashing, it indicates that the server
is turned off and is still connected to an ac power source. When this LED is
off, it indicates that ac power is not present, or the power supply or the LED
itself has failed. A power LED is also on the rear of the server.
Note: If this LED is off, it does not mean that there is no electrical power in
the server. The LED might be burned out. To remove all electrical
power from the server, you must disconnect the power cord from the
electrical outlet.
USB 3 connector
USB 4 connector
Hard disk drive
status LED
USB 3 connector
USB 4 connector
Video connector
Hard disk drive
activity LED (SAS model)
System
locator System-error
LED (blue) LED (amber)
System
information
LED (amber)
Chapter 1. The System x3350 Types 4192 and 4193 server
Operator information
panel
Rack release latch
CD-RW/DVD eject button
CD-RW/DVD drive activity LED
Operator information panel
Rack release latch
CD-RW/DVD eject button
CD-RW/DVD drive
activity LED
Hard disk drive
status LED (SAS model)
Release
latch
9