Table of Contents
Advertisement
Chapter 3. Installing optional devices
This chapter provides detailed instructions for installing optional hardware devices in
the server.
Instructions for IBM Business Partners
In addition to the instructions in this chapter for installing optional hardware devices,
updating firmware and device drivers, and completing the installation, IBM Business
Partners must also complete the following steps:
1. After you have confirmed that the server starts correctly and recognizes the
2. Shut down and restart the server multiple times to ensure that the server is
3. Save the DSA log as a file and send it to IBM. For information about transferring
4. To ship the server, repackage it in the original undamaged packing material and
Support information for IBM Business Partners is available at http://www.ibm.com/
partnerworld/.
How to send DSA data to IBM
Before you send diagnostic data to IBM, read the terms of use at
http://www.ibm.com/de/support/ecurep/terms.html.
You can use any of the following methods to send diagnostic data to IBM:
v Standard upload: http://www.ibm.com/de/support/ecurep/send_http.html
v Standard upload with the system serial number: http://www.ecurep.ibm.com/
v Secure upload: http://www.ibm.com/de/support/ecurep/send_http.html#secure
v Secure upload with the system serial number: https://www.ecurep.ibm.com/
© Copyright IBM Corp. 2012
newly installed devices and that no error LEDs are lit, run the Dynamic System
Analysis (DSA) stress tests. For information about using DSA, see the Problem
Determination and Service Guide.
correctly configured and functions correctly with the newly installed devices.
data and logs, see http://publib.boulder.ibm.com/infocenter/toolsctr/v1r0/
index.jsp?topic=/dsa/dsa_main.html.
observe IBM procedures for shipping.
app/upload_hw
app/upload_hw
23
Advertisement
Table of Contents
