Installing A Cd Or Dvd Drive - IBM x3105 - System - 4347 User Manual

v Only an optional diskette drive can be installed in bay 3. Other drives are not
v You can install SATA hard disk drives in bays 4 and 5 only.
v The integrated IDE controller supports the connection of up to two IDE devices.
v The electromagnetic interference (EMI) integrity and cooling of the server are
v For a complete list of supported optional devices for the server, see

Installing a CD or DVD drive

To install a CD or DVD drive in bay 1 or 2, complete the following steps:
supported in bay 3.
protected by having all bays and PCI or PCI Express slots covered or occupied.
When you install a drive or PCI or PCI Express adapter, save the EMC shield
and filler panel from the bay or the PCI or PCI Express adapter slot cover in the
event that you later remove the drive or adapter.
http://www.ibm.com/support/.
1. Read the safety information that begins on page v and "Installation guidelines"
on page 16.
2. Turn off the server and peripheral devices, and disconnect the power cords
and all external cables.
3. Remove the side cover (see "Removing the side cover" on page 19).
4. Remove the bezel (see "Removing the bezel" on page 20).
Chapter 2. Installing optional devices
25