IBM x3105 - System - 4347 User Manual page 34

To install a DIMM, complete the following steps:
1. Locate the DIMM connectors on the system board. Determine the connectors
22
System x3105 Type 4347: User's Guide
into which you will install the DIMMs. Install the DIMMs in the sequence shown
in the following table.
DIMM 1
DIMM 2
DIMM 3
DIMM 4
DIMMs
1 DIMM
2 DIMMs
4 DIMMs
Note: You can install one, two, or four DIMMs in the server, but not three DIMMs. Three
DIMMs are not supported.
Connectors
1
1, 2
1, 2, 3, 4
DIMM 1 error LED
DIMM 2 error LED
DIMM 3 error LED
DIMM 4 error LED