IBM LS21 - BladeCenter - 7971 Installation And User Manual page 14

Record information about the blade server in the following table. You will need
these numbers when you register the blade server with IBM. You can register the
blade server at http://www.ibm.com/support/mysupport/.
The model number and serial number are on the ID label that is behind the control
panel door on the front of the blade server, and on a label on the side of the blade
server that is visible when the blade server is not in the BladeCenter unit.
The LS41 Type 7972 blade server is available in two configurations. Some models
come with the optional multi-processor expansion (MPE) unit and are a
double-width type blade servers. These models require two adjacent blade bays in
the BladeCenter unit. The LS21 Type 7971 blade servers and the LS41 Type 7972
blade servers without the optional MPE are a single-width type blade server and
require only one blade bay in the BladeCenter unit.
Note: The illustrations in this document might differ slightly from the hardware.
The single-width type LS21 Type 7971 and LS41 Type 7972 blade server is shown
in the following illustration.
Release
handles
2
BladeCenter LS21 Type 7971 and LS41 Type 7972: Installation and User's Guide
Product name
Machine type
Model number
Serial number
BladeCenter LS21 or LS41
7971 or 7972
_____________________________________________
_____________________________________________