Video Config - Panasonic BT-LH1710 - Professional - LCD Production Monitor Operating Instructions Manual

Main Menu
(continued)

VIDEO CONFIG

Sub menu Settings
GAMMA
STANDARD
*1*2
SELECT
FILM
STDIO/PST
*2
VARICAM
FILM GAMMA
OTHER
COLOR TEMP.
USER0 - 63
D93
D65
D56
VAR1
VAR2
VAR3
SHARPNESS
HIGH
*2
LOW
MODE
*2
0 - 30
SHARPNESS H
*2
0 - 30
SHARPNESS V
*2*6
MODE2
I-P MODE
MODE1
*2
OFF
MONO
ON
*2*7
OFF
ANAMO
ON
*2
4:3
SD ASPECT
16:9
*2
NORMAL
SCAN
UNDER
*1 In split-screen display, changes are not reflected to the still image in the main window.
*2 These functions are not available when "RGB-COMP." under "YP
selected in the "INPUT SELECT" menu (
*3 The following sharpness values are available and the settings for the selected input signal is displayed.
Adjustment status during selection appears at the bottom right of the screen.
1) VIDEO system input (VIDEO) (the factory defaults are SHARPNESS MODE: LOW and SHARPNESS H/V: 0)
2) HD for any other input (the factory defaults are SHARPNESS MODE: HIGH and SHARPNESS H/V: 0).
3) SD for any other input (the factory defaults are SHARPNESS MODE: LOW and SHARPNESS H/V: 0).
*4 Selecting "VAR1", "VAR2" and "VAR3" engages the WB adjustment mode (
*5 To select USER0 - 63,
1) Press [ENTER] ("USER" changes to blue).
*6 To use the "SUB WINDOW" (
1) Change settings after exiting the "SUB WINDOW" function.
2) It is recommended to use "MODE2" for handling fast video.
*7 "SCAN" changes are not reflected in Anamo size display.
20
Description
Selects gamma curve.
<STANDARD> Standard mode
<STDIO/PST> Color emphasis mode (a mode that approximates CRT
The
is selected.
Selects type of FILM gamma mode.
<VARICAM> For VARICAM use
*5
Selects color temperature.
<USER 0 - 63> Adjustable settings 0 - 63 (equivalent to a color
<D93> Equivalent to a color temperature of 9,300K
<D65> Equivalent to a color temperature of 6,500K
<D56> Equivalent to a color temperature of 5,600K
<VAR1> WB adjustment mode
<VAR3> WB adjustment mode
*3
Selects the width of outline correction edge.
<HIGH> Thin edge
*3
Sets horizontal outline correction. The item display moves to the lower
part of the screen during adjustment.
*3
Sets vertical outline correction. The item display moves to the lower part of
the screen during adjustment.
Selects IP conversion mode. (
<MODE2> Inter-field interpolation
<MODE1> Inter-frame interpolation
Switches between color and monochrome (MONO).
<OFF> Color
* When ON, the CHROMA setting of the picture adjusting knob is fixed at 0.
With an Anamo lens and SDI 720/60P, 59.94P input, the picture is
resized to Anamo magnification (the vertically enlarged signal can be
vertically compressed and corrected for display).
Sets the aspect ratio for SD signal input.
<4:3> 4:3 display
Sets under-scan and normal display.
<NORMAL> Normal display
page 30).
page 25) function,
Underlined values indicate factory defaults.
<FILM> Film mode
display capability suitable for studio or postproduction
application)
mark appears at the top left of the screen when "FILM"
<OTHER> Other
temperature range of 3,000 - 9,300K)
*4
<VAR2> WB adjustment mode
*4
<LOW> Wide edge
page 21, "IP mode")
<ON> Monochrome
<16:9> 16:9 display
<UNDER> Under-scan
P /RGB" or "DVI-COMP." under "DVI-D" is
B R
2) Use [ , ] to select 0 - 63 and press [ENTER].
page 21).
*4