Front Panel - Panasonic BT-LH1710 - Professional - LCD Production Monitor Operating Instructions Manual

Controls and Their Functions

Front panel

POWER switch
Switches the power supply ON/OFF. When the power is ON, the LED (green) lights up.
INPUT SELECT buttons
Selects the signal input line. The green LED light above the button indicates the selected input signal.
VIDEO : Video input
SDI1 : Serial digital interface input (HD/SD compatible)
SDI2 : Serial digital interface input (HD/SD compatible)
YP P /RGB : Analog component (YP
B R
* When using PC Input, select "RGB-COMP." from "YP
DVI-D : DVI-D input (HDCP compatible)
* When using PC Input, select "DVI-COMP." from "DVI-D" in the "INPUT SELECT" menu
MENU, FUNCTION buttons
Use these buttons to display menus, select and adjust settings and confirm menu selections.
MENU
/FUNCTION1
/FUNCTION2
ENTER/FUNCTION3 : Press to confirm a setting or to open a submenu.
FUNCTION4
FUNCTION5
* When the control lock is on, the key mark appears and FUNCTION does not operate.
Picture adjusting knob
PHASE
CHROMA
BRIGHT
CONT [CONTRAST]
( ) denotes factory preset values.
Turn or press this knob to display and adjust menu settings. Press the knob a second time to save settings.
When values are changed from the factory defaults, the LED above the knob (amber) lights.
Settings are loaded when the monitor is turned on. The settings are saved when the knob is pressed, or when
10 seconds have elapsed after they have been changed. However, operating changes cannot be made in the
following conditions.
* When the control lock is on, the key mark appears and setting values cannot be changed (
* When the MONO function is ON (
* When using "RGB-COMP." input or "DVI-COMP" input, [PHASE] and [CHROMA] operations are disabled.
* While operating HV DELAY (
Volume knob
Turn this knob to adjust speaker and headphones volume.
Speaker
The speaker reproduces audio input from the AUDIO input terminal or SDI terminal (embedded audio).
* Connecting headphones to the HEADPHONES output connector turns off the speakers.
P
B R
menu ( page 30).
( page 30).
: Press to open a menu, exit a menu or return to a previous menu.
: Moves the cursor downwards and selects items.
It also confirms a menu item assigned to FUNCTION1.
: Moves the cursor upwards and selects items.
It also confirms a menu item assigned to FUNCTION2.
It also confirms a menu item assigned to FUNCTION3.
: Confirms a menu item assigned to FUNCTION4.
: Confirms a menu item assigned to FUNCTION5.
0 - 60 (30)
0 - 60 (30)
0 - 60 (30)
0 - 60 (50) / B.LIGHT [BACKLIGHT] 0 - 60 (60)
page 20), [PHASE] and [CHROMA] operations are disabled.
page 24) (when set to any other setting than OFF), [BRIGHT] operation is disabled.
(continued)
) or RGB input. Also compatible with PC input RGB.
P /RGB" in the "INPUT SELECT"
B R
page 34).
9