Display Setup - Panasonic BT-LH1710 - Professional - LCD Production Monitor Operating Instructions Manual

Main Menu
(continued)

DISPLAY SETUP

Sub menu Settings
WFM/
OFF
VECTOR
WFM
VECTOR
POSITION
LB
RB
RT
LT
VECTOR
× 8
MODE
× 4
× 2
× 1
VECTOR
100%
SCALE
75%
TIME CODE
OFF
ON
MODE
LTC
SELECT
VITC
LUB
VUB
CLOSED
OFF
CAPTION
ON
MODE
CC4
SELECT
CC3
CC2
CC1
*1 Available during HD-SDI input signals.
*2 Available during VIDEO (NTSC) input. Closed captions appear as bright lines on line 21 when closed caption is
set to ON and underscan is also on.
*3 Opens the vector display during SDI signal input.
Description
Switches between "WFM/VECTOR" waveform and vector display.
<WFM> Displays waveforms.
<VECTOR> Displays vector waveforms.
Selects the position for the "WFM/VECTOR" waveform display.
<LB> Left Bottom
<RB> Right Bottom
<RT> Right Top
<LT> Left Top
Enlarges vector waveforms.
<× 8> 8×
<× 4> 4×
<× 2> 2×
<× 1> 1×
Determines the scale of vector waveform.
<100%> Displays it at 100% scale.
<75%> Displays it at 75% scale.
Turns the time code display on and off.
Selects time code display mode.
<LTC> Displays linear time code (LTC).
<VITC> Displays vertical interval time code (VITC).
<LUB> Displays user bits included in LTC.
<VUB> Displays user bits included in VITC.
Turns closed caption display on and off.
Selects the cross caption display mode.
Underlined values indicate factory defaults.
*3
*3
*1
*1
*2
*2
*3
33