Remote Specifications - Panasonic BT-LH1710 - Professional - LCD Production Monitor Operating Instructions Manual

REMOTE Specifications

This monitor permits remote operation via GPI/RS-232C terminal.
GPI terminal
GPI screen items correspond to the following terminals. Use the GPI menu to assign functions to each terminal ( page 29).
Functions assigned to terminals are executed when GND (pin 5) is short-circuited (ON) or open (OFF).
GPI Terminal (9P)
Assigned item Function
UNDEF
Undefined (no function assigned)
MARKER1
Switches marker display defined in "GPI PRESET1"
*1
ON/OFF (
MARKER2
Switches marker display defined in "GPI PRESET2"
*1
(
ON/OFF
MARKER
Reduces the brightness of the background outside the
*2
marker displayed in "GPI PRESET1" ( page 18) to 50%.
BACK HALF
MARKER
Reduces the brightness of the background outside the
*2
BACK BLACK marker displayed in "GPI PRESET1" ( page 18) to 0%.
CENTER MARKER
Turns the center marker display on and off. (When
other markers are displayed, this marker is
superimposed on other markers.)
INPUT SEL. VIDEO
Switches the input line to VIDEO.
INPUT SEL. SDI1
Switches the input line to SDI1.
INPUT SEL. SDI2
Switches the input line to SDI 2.
INPUT SEL.
Switches the input line to YP
YP P /RGB
B R
INPUT SEL. DVI-D
Switches the input line to DVI-D.
SD ASPECT
Sets the aspect ratio for SD signal input. (Disabled during
HD and PC signal input)
SCAN
Switches the scan mode between "UNDER" and
"NORMAL". (Disabled during PC signal input)
*3
Lights the red tally.
R-TALLY
*3
G-TALLY Lights the green tally.
MONO
Switches between color and monochrome (MONO).
(Disabled during PC signal input)
GAMMA SEL. FILM
Switches the gamma curve to FILM mode.
GAMMA SEL. STDIO/
Switches the gamma curve to STDIO/PST mode.
PST
*4
Selects the SYNC when using YP
SELECT SYNC
PIXEL TO PIXEL
Switches screen display between input size and
display size.
*1 When a 16:9 marker and a 4:3 marker are simultaneously selected and activated on a 16:9 aspect ratio display,
both markers are displayed.
*2 When a 16:9 marker and a 4:3 marker are simultaneously displayed, the background of the marker selected by
the 16:9 marker is controlled.
*3 When "R-TALLY" and "G-TALLY" simultaneously go on, the tally color changes to orange.
*4 This is only enabled when "RGB-VIDEO" is selected under "YP
36
Pin number Signal
1 GPI1
2 GPI2
3 GPI3
4 GPI4
5 GND
6 GPI5
7 GPI6
8 GPI7
9 GPI8
page 18) in the "MARKER" menu.
page 18) in the "MARKER" menu.
P
B
■ Operating conditions
Level operation: Operates when GND is short-circuited.
Edge operation: Operates when GND changes from
* When level operation is assigned to more than one
terminal, the function operates as long as one of the
terminals is short-circuited.
Operating conditions
/RGB.
R
P RGB-VIDEO input.
/
B R
P /RGB" in the "INPUT SELECT" menu.
B R
open to short-circuited.
—
Level operation
(Short-circuited: ON, Open: OFF)
Level operation
(Short-circuited: ON, Open: OFF)
Level operation
(Short-circuited: ON, Open: OFF)
Level operation
(Short-circuited: ON, Open: OFF)
Level operation
(Short-circuited: ON, Open: OFF)
Edge/level operation
Edge/level operation
Edge/level operation
Edge/level operation
Edge/level operation
Level operation
(Short-circuited: 16:9, open: 4:3)
Level operation (Short-circuited: UNDER,
Open: NORMAL)
Level operation
(Short-circuited: ON, Open: OFF)
Level operation
(Short-circuited: ON, Open: OFF)
Level operation (Short-circuited:
monochrome, Open: color)
Level operation (Short-circuited: FILM
mode, Open: STANDARD mode)
Level operation (Short-circuited: STDIO/
PST mode, Open: STANDARD mode)
Level operation
(Short-circuited: EXT, Open: INT)
Level operation
(Short-circuited: ON, Open: OFF)