How To Use The On Screen Menu - Panasonic BT-LH1710 - Professional - LCD Production Monitor Operating Instructions Manual

How to Use the On Screen Menu

The screen displays eight types of information: input signal status, picture adjusting knob status, sharpness display,
FUNCTION display, audio level meter display, menu display, time code display and closed caption display.
Input signal status
Picture adjusting knob status
Sharpness display
12
1. The selected input line (
• VIDEO, SDI1, SDI2,
YP P /RGB-VIDEO/RGB-COMP.
B R
DVI-VIDEO/DVI-COMP.
2. Signal format
• Use "STATUS DISPLAY" in the "SYSTEM CONFIG"
menu to set the display status (
• "UNSUPPORT SIGNAL" appears if an unsupported
signal is input. It may also indicate that the format
selected in the "INPUT SELECT" menu does not
match the input signal.
• "NO SIGNAL" appears if no signal is input.
3. Various indications (PIXEL TO PIXEL mode)
• This indicates the PIXEL TO PIXEL mode is
engaged.
4. Various indications (FILM mode)
• This indicates that "GAMMA SELECT" is set to
"FILM."
5. Various indications (lock status)
• This indicates that the control lock is on.
Note:
"UNSUPPORT SIGNAL" and "NO SIGNAL" may not be
properly displayed.
Picture adjusting knob (
• Press or turn this knob to make adjustments.
• The status display appears when the knob is
pressed. To clear the display, press the knob again
or leave it idle for 10 seconds.
• Only adjustments that appear on the screen can be
adjusted.
• The display always appears in the same screen
location.
Display status:
PHASE, CHROMA, BRIGHT, CONTRAST or BACKLIGHT.
Note:
The status of the volume knob does not appear on the
screen.
• This is the SHARPNESS H/V mode display.
• It disappears after 2 minutes of inaction.
page 9, )
page 22).
page 9, )