Table of Contents
Advertisement
Quick Links
Operating Instructions/Bedienungsanleitung
Mode d'emploi/Istruzioni per l'uso
Instrucciones de funcionamiento
LCD Video Monitor/LCD-Videomonitor
Moniteur Vidéo LCD/Monitor VIDEO LCD
Monitor de vídeo LCD
BT-
E
Model No.
Before operating this product, please read the instructions carefully and save this manual for future use.
Bitte lesen Sie diese Bedienungsanleitung vor der Inbetriebnahme dieses Produkts aufmerksam durch, und
bewahren Sie sie für späteres Nachschlagen auf.
Avant d'utiliser l'appareil, lire attentivement ce mode d'emploi, et le conserver à des fins de référence ultérieure.
Prima di far funzionare questo prodotto, leggere attentamente le istruzioni e conservare questo manuale per
riferimenti futuri.
Antes de utilizar este producto, lea cuidadosamente las instrucciones y guarde este manual por si tiene que
utilizarlo en el futuro.
ENGLISH
S0805M1095 -H
D
Printed in Japan
VQT0U70-1
Advertisement
Table of Contents
Related Manuals for Panasonic BT-LH1700WE
Summary of Contents for Panasonic BT-LH1700WE
-
Page 1: Instrucciones De Funcionamiento
Operating Instructions/Bedienungsanleitung Mode d’emploi/Istruzioni per l’uso Instrucciones de funcionamiento LCD Video Monitor/LCD-Videomonitor Moniteur Vidéo LCD/Monitor VIDEO LCD Monitor de vídeo LCD Model No. Before operating this product, please read the instructions carefully and save this manual for future use. Bitte lesen Sie diese Bedienungsanleitung vor der Inbetriebnahme dieses Produkts aufmerksam durch, und bewahren Sie sie für späteres Nachschlagen auf. -
Page 2: For Your Safety
For Your Safety Operating precaution Operation near any appliance which generates strong magnetic fields may give rise to noise in the video and audio signals. If this should be the case, deal with the situation by, for instance, moving the source of the magnetic fields away from the unit before operation. - Page 3 If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer. indicates safety information. Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households) This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste.
-
Page 4: Table Of Contents
Precautions for Use • The liquid crystal portion is manufactured with highly precise technology. It includes over 99.99% effective pixels, but 0.01% or less of the pixels are either missing, or have fixed lighting (red, blue, green). This is not a sign of malfunction. -
Page 5: Outline
Outline The BT-LH1700W liquid crystal monitor was designed especially for broadcasting service and business use. It is equipped with a high performance 17.1-inch wide liquid crystal display panel. g High performance liquid crystal panel This monitor achieves outstanding color reproduction, a wide viewing angle, and high-speed response. g Immediate image output of input signals The time-lag caused by IP field unit conversion output has been suppressed to the absolute minimum. -
Page 6: Controls And Their Functions
Controls and Their Functions Video monitor unit Front view Front panel ( Rear view page E-6) An embedded audio unit (BT-YAE1700G) can be attached( Installation Guide included). Rear panel ( page E-7) Power supply [you can switch between AC and DC ( page E-8)]... -
Page 7: Front Panel
Controls and Their Functions Front panel POWER switch This switches the power supply ON/OFF. When the power is ON, the LED (green) lights up. INPUT SELECT button This selects the signal input line. The green LED light above the button indicates the selected input signal. VIDEO Video input Y/C input... -
Page 8: Rear Panel
Controls and Their Functions Rear panel SDI (HD/SD) terminal (BNC) : This is the SDI input terminal (compatible with HD/SD automatic switching). : This is the SDI input terminal (compatible with HD/SD automatic switching). SWITCHED OUT : This is the active through-out terminal for the SDI input signal being displayed on the screen. * SDI active through-out is only outputted when [SDI1] or [SDI2] is selected using the [INPUT SELECT] buttons. -
Page 9: Power Supply
Power Supply Connecting and fixing the AC mains lead 1. Attach the AC mains lead to the monitor unit. Using the AC mains lead hook and the screw, attach the AC mains lead to the monitor unit. AC mains lead AC mains lead hook Screw 2. -
Page 10: How To Use The On Screen Menu
How to Use the On Screen Menu Three types of information are displayed on the screen. The input signal status, picture adjusting knob status, and the menu display. Input signal status Picture adjusting knob status Menu display MENU Displays the operation explanation for the menu button. - Page 11 How to Use the On Screen Menu Menu operations 1. Push [MENU] to display the MAIN menu. 2. Push [ ] to select the menu, then push [ENTER]. MENU To return to the previous screen Push [MENU]. (continued) 3. Push [ ] to select the sub menu, then push [ENTER].
-
Page 12: User Data
User Data You can change the menu setting values and picture adjusting knob settings, then save and load up to 5 combinations of screen adjustment values as user data. You can also return the setting values and adjustment values to the factory preset settings. The following settings are included in user data. -
Page 13: Main Menu
Main Menu Menu configuration MAIN MARKER VIDEO CONFIG BACKLIGHT SYSTEM CONFIG FUNCTION1 FUNCTION2 SUB WINDOW WFM POSITION MENU POSITION ROTARY POSITION STATUS DISPLAY SETUP LOAD SETUP SAVE FAN MOTOR INPUT SELECT VIDEO/ Y/C NTSC SETUP COMPONENT LEVEL RGB SYNC COMP. AUDIO INPUT SELECT EMBEDDED SELECT L... -
Page 14: Marker
Main Menu (continued) MARKER Sub menu Settings *1*2 <OFF> MARKER 16:9 <4:3 > <13:9> <14:9> <CNSCO> <VISTA> <95%> <93%> <90%> <88%> <80%> *1*3 <OFF> MARKER 4:3 <95%> <93%> <90%> <88%> <80%> <NORMAL> MARKER BACK <HALF> <BLACK> <OFF> CENTER MARKER <ON> GPI PRESET1 <4:3 >... -
Page 15: Types Of Marker
Main Menu (continued) Types of MARKER g 16:9 marker (Displayed when using HD, or when using SD with a 16:9 aspect ratio) The marker is only displayed as a vertical bar. In addition, the section becomes the “MARKER BACK” item. 4:3 marker 13:9 marker 14:9 marker... -
Page 16: Video Config
Main Menu (continued) VIDEO CONFIG Sub menu Settings GAMMA <NORMAL> SELECT <FILM> <VARICAM> FILM GAMMA <OTHER> COLOR TEMP. <USER0–63> <D93> <D65> <D56> <VAR1> <VAR2> <VAR3> SHARPNESS <HIGH> <LOW> MODE <0–30> SHARPNESS H <0–30> SHARPNESS V <MODE2> I-P MODE <MODE1> <OFF> MONO <ON>... -
Page 17: System Config
Main Menu (continued) g WB adjustment mode You can adjust “WHITE BALANCE VAR1” – “WHITE BALANCE VAR3” (WB) by selecting “VAR1” – “VAR3” in “COLOR TEMP.” in the “VIDEO CONFIG” menu. Sub menu Settings COLOR TEMP. <USER0–63> <D93> <D65> <D56> WB-HIGH RED <0–60>... - Page 18 Main Menu (continued) SYSTEM CONFIG Sub menu Settings SUB WINDOW <FULL> <PART> <WFM> WFM POSITION <LB> <RB> <RT> <LT> MENU <CENTER> POSITION <LB> <RB> <RT> <LT> ROTARY <CENTER> POSITION <LB> <RB> <RT> <LT> STATUS DISPLAY <CONTINUE> <3SEC OFF> <OFF> SETUP LOAD <FACTORY>...
- Page 19 Main Menu (continued) g About the SUB WINDOW You can compare saved still and moving images or show the Wave Form Monitor (WFM) by using the “SUB WINDOW” function to separate the main window into 2 displays as shown below. Depending on the settings of the “SUB WINDOW”...
-
Page 20: Gpi
Main Menu (continued) The “GPI CONTROL” item is used to set enable/disable of all GPI functions, and assigns functions to each of the GPI terminal pins ( page E-22). Sub menu Settings GPI CONTROL <DISENABLE> <ENABLE> GPI1–GPI8 <UNDEF> <MARKER1 ON/OFF> <MARKER2 ON/OFF>... -
Page 21: Input Select
Main Menu (continued) INPUT SELECT Sub menu Settings VIDEO / Y/C <AUTO> <NTSC> <PAL> NTSC SETUP <75> <00> /RGB <YP > <RGB-VIDEO> <RGB-COMP.> COMPONENT <SMPTE> LEVEL <B75> <B00> RGB SYNC <G-ON> <EXT> COMP. *1 “AUTO” is set when the monitor is shipped from the factory, but if there are concerns about noise etc. from outside the input signal, we recommend assigning specific format. -
Page 22: Audio
Main Menu (continued) g “PHASE” and “CLOCK” factory preset setting values FORMAT CLOCK 640x400(70Hz) 640x480(60Hz) 640x480(75Hz) 640x480(85Hz) 800x600(60Hz) 1056 800x600(75Hz) 1056 800x600(85Hz) 1048 AUDIO Adjusting the speaker output. This can only be set when the monitor is equipped with an embedded audio unit BT- YAE1700G (optional). -
Page 23: Remote Specifications
REMOTE Specifications REMOTE operation is possible on this monitor using the GPI/RS-232C terminal. GPI terminal Each of the items in the GPI screen are compatible with the following terminals. You can assign functions to each terminal in the menu GPI screen ( The functions assigned to each terminal operate when the GND (5 Pin) is connected (ON) or open (OFF). - Page 24 REMOTE Specifications g Assignment of item priority levels • When both “MARKER1” and “MARKER2” are ON at the same time, “MARKER1” has priority. • When both “MARKER BACKHALF” and “MARKER BACKBLACK” are ON at the same time, “MARKER BACKBLACK” has priority. •...
- Page 25 REMOTE Specifications g Setting command No Command Explanation Input switch Image quality adjustment Blue only HV Delay Status display Analog mode RGB Sync Marker settings Gamma selection Color temperature settings Sharpness settings IP mode settings Monochrome settings SD aspect settings Scan settings Remote settings Remote operation...
- Page 26 REMOTE Specifications g Query command No Command Explanation Input selection Image quality adjustment Blue only Marker Gamma Color temperature Sharpness IP mode Monochrome 10 QAS Aspect 11 QSC Scan Analog mode 13 QSY RGB sync Format E-25 (continued) Data 0: SDI1 3: RGB-VIDEO 6: RGB-COMP.
-
Page 27: How To Attach The Rack Mounting
How to Attach the Rack mounting If you use rack-mounting adaptors BT-MA1710G (optional) with this monitor, you can incorporate a 19-inch standard rack (the height is 7U size). Please see the instructions below for attachment. 1. Remove the screws on the back and base of the monitor (3 places), and remove the stand. -
Page 28: Maintenance Inspections
Maintenance Inspections Maintenance inspections are necessary for the user to use this equipment safely. It is important to keep monitor functions in good condition at all times through periodical and appropriate maintenance. In order to use this monitor for a long time, and to make full use of all of its functions, be sure to carry out the following maintenance inspections. - Page 29 Specifications (continued) g List of compatible signal formats Input signal VIDEO formats NTSC 480/59.94I 480/59.94P 576/50I 576/50P 720/50P 720/59.94P 720/60P 1035/59.94I 1035/60I 1080/23.98PsF 1080/24PsF 1080/23.98P 1080/24P 1080/25P 1080/29.97P 1080/30P 1080/50I 1080/50P 1080/59.94I 1080/60I 1080/59.94P 1080/60P 640 x 400 (70Hz) 640 x 480 (60Hz) 640 x 480 (75Hz) 640 x 480 (85Hz) 800 x 600 (60Hz)
- Page 30 Matsushita Electric Industrial Co., Ltd. Web Site: http://www.panasonic.co.jp/global/ © 2005 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.