This chapter describes how to configure the advanced features of your WG103 ProSafe 802.11g
Wireless Access Point. These features can generally be found under Advanced under the main
options of the Configuration tab such as System, Wireless, and Security (as an example, see
Figure 5-1 on page
5-2).
This chapter includes:
•
"Ethernet Link
Configuration" on this page.
•
"Hotspot Settings" on page
•
"802.1Q VLAN Settings" on page 5-3
•
"Configuring Advanced Wireless LAN Settings" on page 5-5
•
"Configuring Advanced QoS Settings" on page
station and access point Enhanced Distributed Channel Access (EDCA) settings.
•
"Wireless Bridging and Repeating" on page 5-9
Ethernet Link Configuration
The Ethernet link configuration settings allow you to select or set the type of Ethernet link for the
wireless access point.
To configure Ethernet links:
1. Log in to the wireless access point at its default LAN address of http://192.168.0.229 with its
default user name of admin and default password of password, or using whatever password
and LAN address you have chosen for the wireless access point.
2. Select Configuration > System > Advanced > Ethernet. The Ethernet settings screen
displays (see
Figure 5-1 on page
Advanced Configuration
5-2. This section describes how to redirect HTTP requests.
5-6. This section describes how to configure
5-2).
v1.0, February 2009
Chapter 5
5-1