NETGEAR WG103 - ProSafe - Wireless Access Point Reference Manual page 28

WG103 ProSafe 802.11g Wireless Access Point Reference Manual
3. Click Apply to save your settings.
4. Click Time. The Time Settings screen appears. (The full path to his screen is Configuration >
System > Basic > Time.)
Figure 2-4
Specify the following fields:
• Time Zone. Select the time zone to match your location.
• Current Time. The current time, as used on the wireless access point, is displayed.
• NTP Client. Select one of the following radio buttons:
– Enable. Your wireless access point synchronizes with a Network Time Protocol
(NTP) server.
– Disable. Your wireless access point does not synchronize with an NTP server.
• Use Custom NTP Server. Enable this check box if you want to use a custom NTP server.
• Hostname / IP Address. Provide the hostname or IP address of the time server that the
wireless access point must use to keep its time correct. The default is time-b.netgear.com.
Note: You must have an Internet connection to use an NTP server that is not
5. Click Apply to save your settings.
2-6
on your local network.
v1.0, February 2009
Basic Installation and Configuration