Configure Basic QoS Settings
The QoS screen lets you modify the quality of service (QoS) settings for upstream traffic flowing
from a client station to the wireless access point and the downstream traffic flowing from the
wireless access point to a client station.
To configure the basic QoS settings:
1. Log in to the wireless access point as described in
page
2-4.
2. Select Configuration > Wireless > Basis > QoS Settings. The basic QoS Settings screen
displays:
Figure 2-7
3. Specify the following fields:
•
Wi-Fi Multimedia (WMM). Select the Enable radio button to ensure that applications
that require better throughput and performance are provided special queues with higher
priority. For example, video and audio applications are given higher priority over
applications, such as FTP. This feature is enabled by default.
•
WMM Powersave. Select the Enable radio button to let power-saving devices that
connect to the wireless access point conserve power. This feature is enabled by default.
4. Click Apply to save your settings.
Basic Installation and Configuration
WG103 ProSafe 802.11g Wireless Access Point Reference Manual
v1.0, February 2009
"Log in to the Wireless Access Point" on
2-11