Table of Contents
Advertisement
NETGEAR ProSafe 802.11g Wireless Access Point WG102 Reference Manual
3. From the main menu Management section, select Upgrade Firmware.
Figure 3-10
4. Click Browse and browse to the location of the image (.IMG) upgrade file.
5. Click Upload.
When the upload completes, your wireless access point automatically restarts. The upgrade
process typically takes about one minute.
In some cases, you may need to reconfigure the wireless access point after upgrading.
Configuration File Management
The WG102 Access Point settings are stored in the wireless access point in a configuration file.
This file can be saved (backed up) to a computer, retrieved (restored) from a computer, or cleared
to factory default settings.
From the main menu, select Backup/Restore Settings to go to the screen shown below.
Figure 3-11
Management
v1.0, July 2008
3-7
Advertisement
Table of Contents
