Table of Contents
Advertisement
NETGEAR ProSafe 802.11g Wireless Access Point WG102 Reference Manual
Activity Log
From the WG102 Access Point main menu, under the Information heading, select Activity Log.
Figure 3-7
You can use a SysLog server to view the Activity Log. If you have a SysLog server on your LAN,
then enable the SysLog. If enabled, you must enter the IP address of your SysLog server and the
port number that your SysLog server uses.
•
SysLog Server IP address: The access point sends all the SysLog to the specified IP address if
SysLog option is enabled. Default: 0.0.0.0
•
Port: The port number configured in the SysLog server on your LAN. The default is 514
The Activity Log screen displays the Access Point system activity.
You can click Refresh to update the display. To save the log contents into a file on your PC, click
Save As and save the file to a disk drive.
Management
v1.0, July 2008
3-3
Advertisement
Table of Contents
