Eva6400 2C6D Configuration - HP 6400/8400 Reference Manual

Enterprise virtual array expansion rack

Hide thumbs Also See for 6400/8400:

Table of Contents

Figure 22 EVA6400 2C6D configuration

To connect the 0C6D expansion rack (with two loops and three disk enclosures per loop) to an

EVA6400 multi-product main rack:

NOTE:

After connecting one cable pair, verify every aspect of the connection before proceeding to the next

cable pair.

Unplug DP1-A on controller A from P1 (I/O-A) on disk enclosure 1 (S-1) and:

Connect DP1-A on controller A to P1 (I/O-A) on disk enclosure 7 (S-7).

Connect P1 (I/O-A) on disk enclosure 1 (S-1) to P2 (I/O-A) on disk enclosure 9 (S-9).

Complete the following verification steps:

Verify that the I/O module on the added disk enclosure has been assigned an index number

of the next highest enclosure number.

In HP Command View EVA, verify that the newly added disk enclosure is listed under the

array hardware in the Navigation pane and the I/O module displays a good operational

status.

Connecting the main rack to the expansion rack

Table of Contents

Storageworks 6400 Storageworks 8400