7.
Press and hold the power push button (located at the rear of the disk enclosure) long enough to
power up the disk enclosure.
8.
Repeat
Step 7
EVA8400
The EVA8400 requires that disk enclosures be balanced across three loops. With six disk enclosures
in an expansion rack, there should be two disk enclosures per loop. With nine disk enclosures in an
expansion rack, there should be three disk enclosures per loop.
the disk enclosures within each loop are connected in both of these scenarios.
NOTE:
The numbering shown in
the I/O module numbering.
1. Loop 1
2. Loop 2
3. Loop 3
Figure 18 0C6D expansion rack for the EVA8400
.
For six disk enclosures in the expansion rack, complete the following steps:
HP StorageWorks 6400/8400 Enterprise Virtual Array expansion rack reference guide
for each disk enclosure in the expansion rack.
Figure 18
and
Figure 19
Figure 18
is for the physical shelf location and may not reflect
and
Figure 19
show how
23