Inserting A Disk Drive; Disk Drive Numbering; Inserting A Drive Blank - HP 6400/8400 Reference Manual

6. To install disk drives:
a. Insert the disk drive into the drive bay (1,
b. Rotate the drive lever to the right (2,
c. Ensure the drives are installed in the proper sequence, following the numbering scheme in
Figure 15.
Figure 14 Inserting a disk drive
.
Figure 15 Disk drive numbering
.
7. Insert a drive blank into any slot without a disk drive
you detect a click.
Figure 16 Inserting a drive blank
.
20 Installing disk enclosures into the expansion rack
Figure 14) until it clicks, locking the drive.
Figure 14) until it locks.
(Figure 16). Push the drive blank in until