Macintosh Os X, Version 10.3 And Higher - Xerox 8860DN - Phaser Color Solid Ink Printer User Manual

Macintosh OS X, Version 10.3 and Higher

Set up your printer using Bonjour (Rendezvous), create a desktop USB connection, or use an
LPD/LPR connection for Macintosh OS X, version 10.2 and higher.
Macintosh OS X, Version 10.3
Bonjour (Rendezvous) Connection
To install the printer driver from the Software and Documentation CD-ROM:
1. Insert the CD-ROM into the CD-ROM drive and select the VISE installer to install the
printer software.
2.
When installation is complete, open the Printer Setup Utility for Mac OS X, version
10.3.x.
Note: To locate utilities on the Macintosh hard drive, open the Applications folder, and
then open the Utilities folder.
3. Confirm that the first drop-down menu is set to Bonjour (Rendezvous).
4. Select the printer in the window.
5. Select Xerox from the list of manufacturers in the lower drop-down menu.
6. Select the appropriate printer model from the list of available devices.
7. Click the Add button.
See also:
For the Phaser 8560 printer:
Advanced Features Guide at
Online Support Assistant at
For the Phaser 8860 printer:
Advanced Features Guide at
Online Support Assistant at
USB Connection
To install the printer driver from the Software and Documentation CD-ROM:
1.
Insert the CD-ROM into the CD-ROM drive. Open the Printer Setup Utility for Mac OS
X, version 10.3.x.
Note: To locate utilities on the Macintosh hard drive, open the Applications folder, and
then open the Utilities folder.
2.
Click the Add button.
3.
Select USB from the drop-down menu.
4. Select the printer in the window.
www.xerox.com/office/8560Psupport
www.xerox.com/office/8560Psupport
www.xerox.com/office/8860support
www.xerox.com/office/8860support
Phaser® 8560/8860 Printer
2-11
Installing the Printer Drivers