Xerox 8860DN - Phaser Color Solid Ink Printer User Manual page 157
User guide
Hide thumbs
Also See for 8860DN - Phaser Color Solid Ink Printer:
- Quick use manual (5 pages) ,
- Advanced features manual (83 pages) ,
- Letter of volatility (1 page)
Table of Contents
Advertisement
Moving the Printer
Follow these guidelines to avoid injuring yourself or damaging the printer:
Keep the printer level. Tilting the printer can cause the ink to spill inside.
Use the
Shut Down
Always allow the printer to cool before it is moved to avoid ink spills that can damage the
printer.
Warning:
Parts of the printer may be hot. To avoid personal injury or damage to the
printer, allow 30 minutes for it to cool down before moving or packing the printer. This
allows the ink to solidify.
Always turn off the printer using the power switch, located under the interface cover on
the right side of the printer. Unplug all cables and cords. Never turn off the printer by
pulling the power cord or using a power-strip with an on/off switch.
mode on the control panel for best results.
Phaser® 8560/8860 Printer
A-5
8860p-030
Advertisement
Table of Contents
