Automatic Address Assignment - Xerox 8860DN - Phaser Color Solid Ink Printer User Manual

Automatic Address Assignment

Addresses are assigned automatically when a router is found that offers one or more prefixes.
Automatically assigned addresses are routeable. Each router-supplied prefix is combined with
the Interface ID to create an address. The use of router-supplied prefixes is enabled by default.
To enable/disable automatic address assignment, use one of the following options:
The printer's control panel
CentreWare IS
Enabling/Disabling Automatic Address Assignment with the Control Panel
To set the Interface ID on the control panel:
1. Select
Printer Setup
2. Select
Connection Setup
3. Select
Network Setup
4. Select
TCP/IPv6 Setup
5. Select , and then press the OK button to turn Auto Assign
Auto Assign
Enabling/Disabling Automatic Address Assignment with CentreWare IS
To set the Interface ID with CentreWare IS:
1.
Launch your web browser.
2.
Enter your printer's IP address in the browser's Address field.
3. Click Properties.
4.
Select the Protocols folder on the left navigation panel, and then click TCP/IP.
5.
Click the TCP/IP (v6) button.
6. Select/deselect Use router supplied prefixes.
7.
Click the Save Changes button at the bottom of the page.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
Phaser® 8560/8860 Printer
2-16
IPv6
or .
On Off