Xerox 8860DN - Phaser Color Solid Ink Printer User Manual page 51

Tray 1 Mode
Tray 1 Mode defines the printer's media handling behavior to better fit the kind of printing you
want to do. Three modes determine how paper size and type are set for Tray 1, and which tray
is used if you do not select a specific tray:
Automatic: The automatic setting enables incoming print jobs to set paper size and type. It
prints from Tray 1 if paper is present at the start of a job and when the job has not selected
another tray.
Dynamic (Default): The dynamic setting prompts the printer to search the trays to find the
paper size and type to match your print job. If no size or type matches are found in Tray 2, 3, or
4, and Tray 1 media size and type have not been set on the printer's control panel, the printer
sets the paper size and type from the print job, and then prints from Tray 1.
Static: The static setting enables the user to select the paper size and type settings for the trays
using the Paper Tray Setup menu option on the printer's control panel. To print from Tray 1,
the paper size and type of your print job must match the Tray 1 paper size and type settings on
the control panel.
See also:
Advanced Features Guide at
office/8860support
www.xerox.com/office/8560Psupport
Phaser® 8560/8860 Printer
3-15
Loading Paper
or www.xerox.com/