Adjust The Paper Guides To Fit The Paper Loaded In The Tray - Xerox 8860DN - Phaser Color Solid Ink Printer User Manual
User guide
Hide thumbs
Also See for 8860DN - Phaser Color Solid Ink Printer:
- Quick use manual (5 pages) ,
- Advanced features manual (83 pages) ,
- Letter of volatility (1 page)
Table of Contents
Advertisement
Pre-punched paper: Insert the side to be printed faceup with the holes toward the
right side of the tray.
Note:
When using pre-punched paper, adjust the print margins to accommodate the holes.
Printing over the holes may cause ink to transfer onto subsequent pages. A minimum
margin of 19 mm (0.75 in.) is recommended.
3.
Adjust the paper guides to fit the paper loaded in the tray (if necessary).
Length guide: Press the sides, then slide the guide until the arrow on the guide points
to the appropriate paper size imprinted on the bottom of the tray. When properly
positioned, the guide clicks into place.
Phaser® 8560/8860 Printer
3-20
Loading Paper
8860p-112
8860p-107
Advertisement
Table of Contents
