Managing your network machine securely using SSL/TLS
To manage your network machine securely, you need to use the management utilities with security protocols.
Secure Management using Web Based Management (web browser)
We recommend to use HTTPS and SNMPv3 protocol for secure management. To use these protocols, the
following machine settings are required.
The HTTPS protocol is enabled by default.
You can change the HTTPS protocol settings on the Web Based Management screen, by clicking
Network, Protocol and then HTTP Server Settings.
Start your web browser.
Type "https://Common Name/" into your browser. (Where "Common Name" is the Common Name that
you assigned for the certificate, such as an IP address, node name or domain name. For how to assign
a Common Name for the certificate, see Using Certificates for device security uu page 66.)
https://192.168.1.2/ (if the Common Name is the machine's IP address)
No password is required by default. Enter a password if you have set one and press
You can now access the machine using HTTPS.
If you use the SNMPv3 protocol, follow the steps below.
You can also change the SNMP settings by using BRAdmin Professional 3.