Download  Print this page

B Appendix B; Using Services; Other Ways To Set The Ip Address (for Advanced Users And Administrators); Using Dhcp To Configure The Ip Address - Brother HL-5450DN Network User's Manual

Multi-protocol on-board ethernet print server and wireless ethernet print server.
Hide thumbs

Advertisement

B
Appendix B

Using services

A service is a resource that can be accessed by computers that wish to print to the Brother print server. The
Brother print server provides the following predefined services (do a SHOW SERVICE command in the
Brother print server remote console to see a list of available services): Enter HELP at the command prompt
for a list of supported commands.
Service (Example)
BINARY_P1
TEXT_P1
PCL_P1
BRNxxxxxxxxxxxx
BRNxxxxxxxxxxxx_AT
POSTSCRIPT_P1
Where "xxxxxxxxxxxx" is your machine's MAC Address (Ethernet Address).
Other ways to set the IP address (for advanced users and
administrators)

Using DHCP to configure the IP address

The Dynamic Host Configuration Protocol (DHCP) is one of several automated mechanisms for IP address
allocation. If you have a DHCP server on your network, the print server will automatically obtain its IP address
from the DHCP server and register its name with any RFC 1001 and 1002-compliant dynamic name services.
Note
If you do not want your print server configured via DHCP, you must set the Boot Method to static so that
the print server has a static IP address. This will prevent the print server from trying to obtain an IP address
from any of these systems. To change the Boot Method, use the machine's control panel Network menu
(for LCD models), BRAdmin applications or Web Based Management (web browser).
TCP/IP binary
TCP/IP text service (adds carriage return after each line feed)
PCL service (switches PJL-compatible machine to PCL mode)
TCP/IP binary
®
PostScript
service for Macintosh
®
PostScript
service (switches PJL-compatible machine to PostScript
Definition
B
B
®
mode)
B
B
B
108

Advertisement

   Related Manuals for Brother HL-5450DN

Comments to this Manuals

Symbols: 0
Latest comments: