Factory Defaults; Setup Menu; Printer Language; Print Area - Lexmark C544DTN - Color Laser Printer 25/25 Ppm Duplex Networkfront Pic User Manual

User's guide
Hide thumbs Also See for C544DTN - Color Laser Printer 25/25 Ppm Duplex Networkfront Pic:
Table of Contents

Advertisement

Menu item
Print Recovery
Jam Recovery
Auto
On
Off
Print Recovery
Page Protect
Off
On

Factory Defaults

Do Not Restore
Restore

Setup menu

Menu item

Printer Language

PCL Emulation
PS Emulation
PPDS Emulation

Print Area

Normal
Fit to Page
Whole Page
Description
Specifies whether the printer reprints jammed pages
Notes:
Auto is the factory default setting. The printer reprints
jammed pages unless the memory required to hold the pages
is needed for other printer tasks.
On sets the printer to always reprint jammed pages.
Off sets the printer to never reprint jammed pages.
Lets the printer successfully print a page that may not have
printed otherwise
Notes:
Off is the factory default setting. Off prints a partial page when
there is not enough memory to print the whole page.
On sets the printer to process the whole page so that the
entire page prints.
Returns the printer settings to the factory default settings
Notes:
Do Not Restore is the factory default setting. Do Not Restore
keeps the user-defined settings.
Restore returns all printer settings to the factory default
settings except Network/Ports menu settings. All downloads
stored in RAM are deleted. Downloads stored in flash memory
or on a printer hard disk are not affected.
Description
Sets the default printer language
Notes:
PCL is the factory default printer language.
PCL emulation uses a PCL interpreter for processing print
jobs. PostScript emulation uses a PS interpreter for processing
print jobs. PPDS emulation uses a PPDS interpreter for
processing print jobs
Setting a printer language as the default does not prevent a
software program from sending print jobs that use another
printer language.
Sets the logical and physical printable area
Note: Normal is the factory default setting. When attempting to
print data in the non-printable area defined by the Normal setting,
the printer clips the image at the boundary.
Understanding printer menus
83

Advertisement

Table of Contents
loading

Table of Contents