Tcp/Ip Menu - Lexmark C544DTN - Color Laser Printer 25/25 Ppm Duplex Networkfront Pic User Manual

Menu item
Job Timeout
0-225 seconds
Banner Page
Off
On

TCP/IP menu

Note: This menu is available only for network models or printers attached to print servers.
This menu is available from the Network/Ports menu:
Network/Ports ª Network Menu ª TCP/IP
Menu item
Activate
On
Off
View Hostname
IP Address
Netmask
Gateway
Enable DHCP
On
Off
Enable Auto IP
Yes
No
Enable FTP/TFTP
Yes
No
Enable HTTP Server
Yes
No
WINS Server Address
Description
Sets the amount of time in seconds that a network print job can take before it
is canceled
Notes:
90 seconds is the factory default setting.
•
A setting value of 0 disables the timeout.
•
If a value of 1–9 is selected, then the setting is saved as 10.
•
Allows the printer to print a banner page
Note: Off is the factory default setting.
Description
Activates TCP/IP
Note: On is the factory default setting.
Lets you view the current TCP/IP hostname
Note: This can be changed only from the Embedded Web Server.
Lets you view or change the current TCP/IP Address
Note: Manually setting the IP address sets the Enable DHCP and Enable Auto IP
settings to Off.
Lets you view or change the current TCP/IP Netmask
Lets you view or change the current TCP/IP Gateway
Specifies the DHCP address and parameter assignment setting
Note: On is the factory default setting.
Specifies the Zero Configuration Networking setting
Note: Yes is the factory default setting.
Enables the built-in FTP server, which allows you to send files to the printer using the
File Transfer Protocol.
Note: Yes is the factory default setting.
Enables the built-in Web server (Embedded Web Server). When enabled, the printer
can be monitored and managed remotely using a Web browser.
Note: Yes is the factory default setting.
Lets you view or change the current WINS Server Address
Understanding printer menus
77