Network/Ports - Lexmark C544DTN - Color Laser Printer 25/25 Ppm Duplex Networkfront Pic User Manual

Network/Ports

Active NIC menu
Menu item
Active NIC
Auto
<list of available network cards>
Network menu
Menu item
PCL SmartSwitch
On
Off
PS SmartSwitch
On
Off
NPA Mode
Auto
Off
Network Buffer
Auto
Disabled
Description
Shows the print server
Notes:
Auto is the factory default setting.
•
This menu item appears only if an optional network card is installed.
•
Description
Sets the printer to automatically switch to PCL emulation when a print job requires
it, regardless of the default printer language
Notes:
On is the factory default setting.
•
When the Off setting is used, the printer does not examine incoming data.
•
When the Off setting is used, the printer uses PostScript emulation if PS
•
SmartSwitch is set to On. It uses the default printer language specified in the
Setup menu if PS SmartSwitch is set to Off.
Sets the printer to automatically switch to PostScript emulation when a print job
requires it, regardless of the default printer language
Notes:
On is the factory default setting.
•
When the Off setting is used, the printer does not examine incoming data.
•
When the Off setting is used, the printer uses PCL emulation if PCL SmartSwitch
•
is set to On. It uses the default printer language specified in the Setup menu
if PCL SmartSwitch is set to Off.
Sets the printer to perform the special processing required for bidirectional
communication following the conventions defined by the NPA protocol
Notes:
Auto is the factory default setting.
•
Changing this setting from the printer control panel and then exiting the
•
menus causes the printer to restart. The menu selection is updated.
Sets the size of the network input buffer
Notes:
Auto is the factory default setting.
•
Changing this setting from the printer control panel and then exiting the
•
menus causes the printer to restart. The menu selection is updated.
Understanding printer menus
75