Kyocera FS-1370DN Operation Manual page 72

>>Sleep Timer
2-54
Sleep Timer (Sleep timer timeout time)
You can adjust the length of time the printer waits before entering Auto
Sleep in the absence of data.
The printer reverts to normal operation mode when the printer receives a
print job, the operation panel is operated, or one of the exterior covers is
opened. The default time is 15 minutes.
Note Calibration is automatically executed before the printer
reverts to normal operation mode.
1
Press
2
Press
3
To change the timeout time, press [OK]. A blinking cursor (_)
appears.
015 min.
4
Press
cursor and set the desired time. The timer can be set between 1 and
240 minutes. Use
5
Press [OK].
6
Press [MENU]. The display returns to Ready.
while >Timer > is displayed.
or repeatedly until >>Sleep Timer appears.
or to increase or decrease the value at the blinking
and to move the cursor right and left.
Using the Operation Panel