Kyocera FS-1370DN Operation Manual page 86

>Service
>>Print Status Page ?
>>Print
Network Status Page?
2-68
Service (for maintenance)
The options available in Service are as follows:
• Print Status Page (Printing the service status page)
• Print Network Status Page (Printing the network status page)
• Print Test Page
• Developer (Initializing the developer unit)
IMPORTANT Service is primarily a menu used by service
representative for maintenance work. There is no need for customers
to use this menu.
1
Press while Adjust/Maintenance > is displayed.
2
Press or
>
Print Status Page (Printing the service status page)
The service status page contains printer settings information that is more
detailed than the standard status page and is therefore mostly for service
purposes. However, there is a great deal of information on the service
status page that may be useful to you.
1
Press while >Service > is displayed.
2
Press or
3
Press [OK]. A question mark (?) appears.
4
Press [OK] again. Processing appears and a service status page
is printed out.
5
When printing ends, the display returns to Ready.
Print Network Status Page (Printing the network status page)
The network status page contains detailed information on the network
settings. This is primarily used for maintenance by service
representative, but it contains information that may also be useful to you.
1
Press while >Service > is displayed.
2
Press or
appears.
3
Press [OK]. A question mark (?) appears.
4
Press [OK] again. Processing appears and a network status page
is printed out.
5
When printing ends, the display returns to Ready.
Print Test Page
The test page is printed to check the effectiveness of printer
adjustments. This is primarily used for maintenance by service
representative, but it contains information that may also be useful to you.
1
Press while >Service > is displayed.
repeatedly until >Service > appears.
repeatedly until >>Print Status Page appears.
repeatedly until >>Print Network Status Page
Using the Operation Panel