Kyocera FS-1370DN Operation Manual page 65

>>Ready
? Off
>>Error
? On
Using the Operation Panel
Ready (Preparation completed tone setting)
When On is selected in this setting, a tone sounds when print preparation
has been completed. The default setting is Off.
1
Press while >Buzzer > is displayed.
2
Press or repeatedly until >>Ready appears.
3
Press [OK]. A blinking question mark (?) appears.
4
Select On or Off using
5
Press [OK].
6
Press [MENU]. The display returns to Ready.
Error (Error tone setting)
When On is selected in this setting, a tone sounds when a problem such
as running out of paper or a paper jam occurs during printing. The
default setting is On.
1
Press while >Buzzer > is displayed.
2
Press or repeatedly until >>Error appears.
3
Press [OK]. A blinking question mark (?) appears.
4
Select On or Off using
5
Press [OK].
6
Press [MENU]. The display returns to Ready.
or .
or .
2-47